LTC3704IMS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3704 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | -72V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Negative |
| Voltage - Supply (Vcc/Vdd) | 2.5V~36V |
| Control Features | Enable, Frequency Control |
| Input Voltage (Min) | 2.5V |
| Topology | Cuk |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.05A |
| Frequency - Switching | 50kHz~1MHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 92 % |
| Clock Sync | Yes |
| Number of Output Phases | 1 |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3704IMS#PBF Overview
This switching controller fits most application requirements since it is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. dc motor controller is suitable for 1 output generation. Tube solid enclosure protects the pmic. The system can process Transistor Driver dc switching's outputs (s). Voltages 2.5V~36V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in an dc switcher with -40°C~125°C TJ. The switching controller is capable of switching at the 50kHz~1MHz position. dc dc regulator is made easier with Surface Mount. Enable, Frequency Control is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. A variety of 10 terminations are available in dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5V. Searching "LTC3704" will return other relevant dc to dc converter ics. There are only 10 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 2.5V. The test statistics indicate that DC regulator outputs a voltage of -72V. It should be noted that the dc to dc regulator only accepts 36V voltage as input voltage. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 92 %. Current is output to the greatest value of 0.05A. With this controller, the phase is 1.
LTC3704IMS#PBF Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 92 %
LTC3704IMS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3704IMS#PBF DC to DC converter applications.
- Driver circuits
- Access control systems
- Electrical distribution systems
- Terrestrial set-top boxes
- Correction machines
- Industrial robots
- Various CNC machine tools
- Wind power
- Hydro power
- CMM
