LTC3708EUH#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3708 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3.2V~36V |
| Control Features | Enable, Power Good, Soft Start, Tracking |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Nominal Input Voltage | 5V |
| Switcher Configuration | PUSH-PULL |
| Input Current | 2.4mA |
| Duty Cycle | 90 % |
| Height | 750μm |
| Length | 5mm |
| Width | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3708EUH#PBF Overview
The switching controller fits in the 32-WFQFN Exposed Pad package and is ideal for most applications. It is sufficient to generate 2 outputs with this dc motor controller. A solid enclosure of Tube surrounds pmic. A total of Transistor Driver dc switching's outputs can be handled by it. 3.2V~36V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. It is suitable for general dc dc regulator when it is set to Surface Mount. To provide efficient switching control, Enable, Power Good, Soft Start, Tracking is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. Terminal (s) of the switching converters are designed at the QUAD position. A variety of 32 terminations are available in dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The nominal DC switcher's voltage input is 5V. You can find other relevant dc to dc converter ics by searching "LTC3708". There are only 32 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. A 36V voltage of DC regulator was detected in the test statistics. A nominal working status is achieved when the input voltage is set to 5V. The maximum input voltage of the dc switcher is 36V, so users need to limit the voltage accordingly. Channels 1 are required for high-quality communication. The switching converter could be operated with an input of 2.4mA current flow.
LTC3708EUH#PBF Features
Transistor Driver Outputs
Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3708EUH#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3708EUH#PBF DC to DC converter applications.
- Sensitive electronic devices
- Drilling machines
- Hydraulic presses
- Die casting equipment
- Television equipment
- Constant current circuits
- Packaging
- Scientific testing
- Magnetohydrodynamic power
- Low output voltage switching power supply circuits
