LTC3727AEG-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3727 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 14V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~30V |
| Control Features | Enable, Power Good, Soft Start |
| Topology | Buck |
| Min Input Voltage | 4V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 255kHz~530kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 580kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
LTC3727AEG-1#TRPBF Overview
It comes in the 28-SSOP (0.209, 5.30mm Width) package, which makes switching controller suitable for most applications. 2 outputs are supported by the dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. This dc control operates at 4V~30V and has a 4V~30V supply voltage. Qualified to work in an dc switcher with -40°C~85°C TA. A switching controller such as this can switch at a value of 255kHz~530kHz . The Surface Mount allows it to be used for dc dc regulator in general. Enable, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. switching converters terminal (s) are designed to be at DUAL. 28 terminations with a variety of function. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 15V. Other relevant dc to dc converter ics can be found by searching "LTC3727". 28 pins are present on switching converter. Switching converter is a special type of Switching Regulator or Controllers. DC regulator outputs 14V voltage based on test statistics. 580kHz is the maximum frequency of this dc regulators. Whenever the current value is 3A, switching converter outputs the highest possible value. 4V is the required supply voltage. It is recommended that there be 1 channels for high-quality communication.
LTC3727AEG-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 255kHz~530kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC3727AEG-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3727AEG-1#TRPBF DC to DC converter applications.
- Program control systems
- Bending machines
- Post equipment
- Hydrogen power
- Wind power
- Direct power supply system
- Digital display device
- Large fire protection systems
- ATMs
- Packaging
