LTC3728LIUH#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3728 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Control Features | Enable, Power Good, Soft Start |
| Input Voltage (Min) | 3.6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 260kHz~550kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 590kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
LTC3728LIUH#PBF Overview
This switching controller fits most application requirements since it is packaged in a 32-WFQFN Exposed Pad package. 2 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. With Transistor Driver dc switching's output (s), it is able to handle it. dc control's supply and operating voltages are 4.5V~28V. Suitable for a -40°C~85°C TA dc switcher. It can switch at 260kHz~550kHz. dc dc regulator is made easier with Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Power Good, Soft Start. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. QUAD are the position of the terminal of the switching converters. Various 32 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. Searching "LTC3728" will return other relevant dc to dc converter ics. Switching converter has a total of 32 pins. Switching converter type is specifically Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 3.6V. The test statistics indicate that DC regulator outputs a voltage of 7V. Considering the dc to dc regulator can only accept 30V input voltage, it is important to take note of this. This Surface Mount makes DC switcher suitable for most prototypes and applications. This dc regulatorhas a max frequency of 590kHz. A maximum value of 3A is output for current. Communication on 1 channels is high-quality.
LTC3728LIUH#PBF Features
Transistor Driver Outputs
Switching Frequency: 260kHz~550kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC3728LIUH#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3728LIUH#PBF DC to DC converter applications.
- Power supplies of electronic gadgets
- Radio equipment
- Scientific research
- Automatic plug-in machines
- Automatic testing equipment
- Linear guide
- Smoke prevention equipment
- Telecommunications equipment
- Smoke exhaust equipment
- Network technology
