LTC3736EUF-2#TRPBF
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3736 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 9.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 4.2V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.75V~9.8V |
| Control Features | Current Limit, Enable, Power Good, Soft Start, Tracking |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 300kHz~750kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 825kHz |
| Duty Cycle (Max) | 100% |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
LTC3736EUF-2#TRPBF Overview
In the 24-WFQFN Exposed Pad package, the switching controller meets most application requirements. There is enough capacity in the dc motor controller to generate the output for the 2 input. There is a Tape & Reel (TR) solid enclosure around the pmic. The program can handle Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 2.75V~9.8V. Qualified to work in an dc switcher with -40°C~85°C TA. There is a switch at 300kHz~750kHz that can be used with this controller. The Surface Mount makes it ideal for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Power Good, Soft Start, Tracking. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at QUAD . An array of 24 terminations of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 4.2V. Other relevant dc to dc converter ics can be found by searching "LTC3736". Total pins of switching converter are 24. Switching converter is a type of Switching Regulator or Controllers in particular. DC regulator outputs 9.8V voltage according to the test statistics. DC regulator has a maximum frequency of 825kHz. The output value is set to the greatest value of 1A. A high-quality communication requires 1 channels.
LTC3736EUF-2#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 300kHz~750kHz
Current Limit, Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3736EUF-2#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3736EUF-2#TRPBF DC to DC converter applications.
- Elevator lighting
- Digital precision reference circuits
- ATMs
- Plate bending machines
- Gear/thread machining machines
- Surge protection circuits
- Post equipment
- Correction machines
- Laboratories
- Network technology
