LTC3775IUD#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 30.4V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3775 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.2V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 250kHz~1MHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 90% |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3775IUD#TRPBF Overview
The switching controller fits in the 16-WFQFN Exposed Pad package and is ideal for most applications. The dc motor controller is adquate to generate for 1 outputs. There is a Tape & Reel (TR) solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 4.5V~38V volts and has 4.5V~38V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. The switching controller can be switched at 250kHz~1MHz. dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Soft Start which allows efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at QUAD . An array of 16 terminations of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. There is a DC switcher's nominal voltage of 12V. You can find other relevant dc to dc converter ics by searching "LTC3775". There are a total of 16 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 4.5V. According to the test statistics, DC regulator outputs 5.2V voltage. It should be fully noted that the dc to dc regulator only accepts 38V input voltage at most. There is a maximum frequency of 1MHz for this dc regulators. DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 30.4V to better satisfy the need. The dc to dc voltage regulator is from the PolyPhase? series.
LTC3775IUD#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 30.4V
LTC3775IUD#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3775IUD#TRPBF DC to DC converter applications.
- Printing equipment
- Network technology
- Hydraulic presses
- Computer rooms
- Production lines
- Serial communication converter
- Television equipment
- Refrigerators of central air conditioners
- Machining centers
- Pipe bending machines
