LTC3786EUD#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE UP TO 60V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3786 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 105kHz~760kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3786EUD#TRPBF Overview
With its 16-WFQFN Exposed Pad package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. PMIC packaging is solid with a Tape & Reel (TR) enclosure. There are Transistor Driver dc switching's output (s) that it can handle. Voltages 4.5V~38V are the dc control's supply voltage and operating voltage, respectively. Worked in a -40°C~125°C TJ dc switcher before. In this switching controller, the switch can be set to 105kHz~760kHz. dc dc regulator can be generalized using Surface Mount. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at QUAD. There are many different types of terminations for 16. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The nominal DC switcher's voltage input is 12V. LTC3786 can be searched for other relevant dc to dc converter ics. In total, switching converter has 16 pins. Switching converter type is specifically Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 4.5V. A 60V voltage of DC regulator was detected in the test statistics. A maximum voltage of 38V is accepted by the dc to dc regulator as an input voltage. There is a maximum frequency of 850kHz for this dc regulators. DC to DC voltage regulator has the value of ALSO OPERATES IN ADJUSTABLE MODE UP TO 60V to better satisfy the requirement.
LTC3786EUD#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 105kHz~760kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE UP TO 60V
LTC3786EUD#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3786EUD#TRPBF DC to DC converter applications.
- Series voltage regulation circuits
- Nuclear power plants
- Mobile phones
- Game consoles
- Smart grid
- Planers
- Combined machine tools
- Pipe bending machines
- Automatic plug-in machines
- Experimental setup
