LTC3803HS6-5#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3803 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 4V~8.1V |
| Control Features | Current Limit, Enable |
| Input Voltage (Min) | 4.9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz |
| Input Voltage (Max) | 5.7V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 230kHz |
| Duty Cycle (Max) | 80% |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3803HS6-5#TRPBF Overview
As a result of SOT-23-6 Thin, TSOT-23-6 compact design, the switching controller is compatible with most applications. For 1 outputs, the dc motor controller is appropriate. There is a Tape & Reel (TR) solid enclosure around the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sVoltages 4V~8.1V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in an dc switcher with -40°C~150°C TJ. With this switching controller, you can switch at 200kHz. The Surface Mount allows it to be used for dc dc regulator in general. Current Limit, Enable is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminals (s) are designed at DUAL. There are many different types of terminations for 6. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 5V. LTC3803 can be searched for other relevant dc to dc converter ics. In total, switching converter has 6 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. 4.9V should be the minimum input voltage for the dc dc voltage regulator. Considering the dc to dc regulator can only accept 5.7V input voltage, it is important to take note of this. You should note that the dc dc regulator's usual output current is 1A. The max frequency of the pmic can reach 230kHz.
LTC3803HS6-5#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Enable
PULSE WIDTH MODULATION
LTC3803HS6-5#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3803HS6-5#TRPBF DC to DC converter applications.
- Refrigerators of central air conditioners
- Industrial robots
- Nuclear power plants
- Experimental setup
- PSRR circuits
- Planers
- Energy management systems
- Smoke prevention equipment
- Machining centers
- Production lines
