LTC3824EMSE#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3824 |
| Function | Step-Down |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | 4V~60V |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~600kHz |
| Input Voltage (Max) | 60V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 460kHz |
| Max Duty Cycle | 100 % |
| Clock Sync | Yes |
| Number of Output Phases | 1 |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3824EMSE#TRPBF Overview
As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. An enclosure of Tape & Reel (TR) is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). DC control operates at 4V~60V volts and has 4V~60V supply voltage. Suitable for work in a -40°C~125°C TJ dc switcher. Switching can be done at 200kHz~600kHz with this switching controller. dc dc regulator is made easier with Surface Mount. To provide efficient switching control, Frequency Control, Soft Start is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Switching converters are designed with the terminal (s) at position DUAL . The 10 terminations can be used for a wide range of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. Search for "LTC3824" to find other relevant dc to dc converter ics. Switching converter has a total of 10 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. Input voltage of dc dc voltage regulator should be 4V. Statistically, the DC regulator outputs 36V voltage. The dc to dc regulator is limited to 60V input voltage. In most cases, the output current of the dc dc regulator will be 2.5A, so note that when you start the project. voltage regulator dc to dcs with a 100 % duty cycle are designed to be reliable when powered on and powered off. DC regulators have a maximum frequency of 460kHz. Phases of this controller are 1.
LTC3824EMSE#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~600kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
LTC3824EMSE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3824EMSE#TRPBF DC to DC converter applications.
- Combined machine tools
- Power supplies of electronic gadgets
- Industrial controllers
- Energy management systems
- Serial communication converter
- Computer application technology
- Electric heating, lighting
- Emergency lighting monitoring equipment
- Fire elevators
- Balance equipment
