LTC3828EUH#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3828 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Control Features | Enable, Phase Control, Power Good, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 260kHz~550kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 590kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
LTC3828EUH#TRPBF Overview
With a 32-WFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. This dc motor controller can be used to generate outputs with 2 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) can be handled by it. 4.5V~28V is the operating voltage and supply voltage of the dc control. A -40°C~85°C TA dc switcher is not a problem. This switching controller can switch at 260kHz~550kHz. Surface Mount makes it suitable for general dc dc regulator. The dcdc regulator features Enable, Phase Control, Power Good, Tracking for efficient switching control. DUAL SWITCHING CONTROLLER analog IC connects the switch converters. There are a QUAD terminal on the switching converters. The 32 terminations can be used for a wide range of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. Searching "LTC3828" will return other relevant dc to dc converter ics. 32 pins are present on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 4.5V. Test statistics indicate DC regulator outputs 7V voltage. The dc dc regulator's usual output current is 25A, which should be noted down when you start a project. There is a maximum frequency of 590kHz on this dc regulators. The dc to dc voltage regulator is from the PolyPhase? series. A high-quality communication requires 1 channels.
LTC3828EUH#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 260kHz~550kHz
Enable, Phase Control, Power Good, Tracking
PULSE WIDTH MODULATION
LTC3828EUH#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3828EUH#TRPBF DC to DC converter applications.
- Smoke exhaust equipment
- Shearing machines
- PSRR circuits
- Industrial controllers
- Electrical power transmission
- Computed tomography (CT)
- Medical monitoring systems
- Product testing
- Servo drive system
- Large fire protection systems
