LTC3835EGN-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3835 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~530kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 580kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Length | 4.8895mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC3835EGN-1#PBF Overview
It comes in the 16-SSOP (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Tube is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) can be handled by it. dc control's supply and operating voltages are 4V~36V. Qualified to work in an dc switcher with -40°C~85°C TA. There is a switch at 250kHz~530kHz that can be used with this controller. A generalization of dc dc regulator can be made using Surface Mount. Enable, Soft Start, Tracking is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . 16 terminations with various dc switching's functions. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. In addition to "LTC3835", there are other relevant dc to dc converter ics you can find. Pins number 16 of switching converter in total. The type is a particular Switching Regulator or Controllers of switching converter. 4V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 10V. At most, the dc to dc regulator accepts 36V input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 20A. DC regulators have a maximum frequency of 580kHz.
LTC3835EGN-1#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~530kHz
Enable, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3835EGN-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3835EGN-1#PBF DC to DC converter applications.
- Energy management systems
- Pipe bending machines
- Electric heating, lighting
- Large fire protection systems
- Printing
- Correction machines
- Precision electronic equipment
- Thermal power
- Die casting equipment
- Constant current circuits
