LTC3864IDE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AS LDO REGULATOR |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3864 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 3.5V~60V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~850kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 810kHz |
| Max Duty Cycle | 100 % |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3864IDE#PBF Overview
The switching controller fits in the 12-WFDFN Exposed Pad package and is ideal for most applications. 1 outputs are supported by the dc motor controller. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc controls with 3.5V~60V voltage are supplied and operated. Suitable for a -40°C~125°C TJ dc switcher. There is a switch at 50kHz~850kHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. Current Limit, Enable, Frequency Control, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . Different dc switching's functions can be applied to 12 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 12V. LTC3864 can be used to locate other relevant dc to dc converter ics. There are only 12 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. 3.5V should be the minimum input voltage for the dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 60V. If you start a project, note down the dc dc regulator's usual output current of 25A. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 100 %. DC regulator has a maximum frequency of 810kHz. To better satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES AS LDO REGULATOR.
LTC3864IDE#PBF Features
Transistor Driver Outputs
Switching Frequency: 50kHz~850kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
ALSO OPERATES AS LDO REGULATOR
LTC3864IDE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3864IDE#PBF DC to DC converter applications.
- Special machining machine tools
- Analog precision reference circuits
- Automation technology
- Hydro power
- Communication system
- Post equipment
- Shearing machines
- Product burn-in
- Die casting equipment
- Hydraulic presses
