LTC3866EUF#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 3.5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3866 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~770kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 25 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 850kHz |
| Clock Sync | No |
| Duty Cycle | 95 % |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3866EUF#PBF Overview
In the 24-WFQFN Exposed Pad package, the switching controller meets most application requirements. 1 outputs can be generated with the dc motor controller. The pmic is packaged in Tube solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). 4.5V~38V is the supply voltage and the operating voltage of the dc control. Suitable for work in a -40°C~125°C TJ dc switcher. There is a switch at 250kHz~770kHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking for efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a QUAD terminal on the switching converters. 24 terminations with various dc switching's functions. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. LTC3866 can be searched for other relevant dc to dc converter ics. The switching converter has a total of 24 pins. Switching converter is a type of Switching Regulator or Controllers in particular. 4.5V should be the minimum input voltage for the dc dc voltage regulator. A 3.5V voltage of DC regulator was detected in the test statistics. The dc to dc regulator can only accept 38V input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 30A. DC regulator850kHz has the maximum frequency. The value of DC to DC voltage regulator is set to ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 3.5V in order to better satisfy the requirement.
LTC3866EUF#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~770kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 3.5V
LTC3866EUF#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3866EUF#PBF DC to DC converter applications.
- CNC system
- Product testing
- Special machining machine tools
- Constant current circuits
- Linear guide
- Hydro power
- Bending machines
- Remotely powered electric motors
- Wind power
- seismic instrument power circuits
