LTC3868EGN-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3868 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 14V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~24V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 105kHz~835kHz 350kHz~535kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Length | 9.893mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
LTC3868EGN-1#TRPBF Overview
Capsuled in the 28-SSOP (0.154, 3.90mm Width) package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 2 outputs. An enclosure of Tape & Reel (TR) is used to package the PMIC. Transistor Driver dc switching's outputs (s) are supported. This dc control operates at 4V~24V and has a 4V~24V supply voltage. A -40°C~85°C TA dc switcher is not a problem. Switching can be done at 105kHz~835kHz 350kHz~535kHz with this switching controller. It is suitable for general dc dc regulator when it is set to Surface Mount. To provide efficient switching control, Enable, Frequency Control, Power Good, Soft Start is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. DUAL are the position of the terminal of the switching converters. The 28 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. Other relevant dc to dc converter ics will be returned if you search "LTC3868". Total pins of switching converter are 28. Particularly, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 4V as the minimum input voltage of dc dc voltage regulator. Statistically, the DC regulator outputs 14V voltage. DC regulators have a maximum frequency of 850kHz. The number of channels available for high-quality communication is 1.
LTC3868EGN-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 105kHz~835kHz 350kHz~535kHz
Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC3868EGN-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3868EGN-1#TRPBF DC to DC converter applications.
- Injection molding machinery
- Correction machines
- Electrical distribution systems
- Electric heating, lighting
- Digital display device
- Low output voltage switching power supply circuits
- Network technology
- Electric water heaters
- CMM
- CNC system
