LTC3883EUH-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN PUSH-PULL MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3883 |
| JESD-30 Code | S-PQCC-N32 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~24V |
| Control Features | Enable, Frequency Control, Phase Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Serial Interfaces | I2C, PMBus |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
LTC3883EUH-1#TRPBF Overview
It comes in the 32-WFQFN Exposed Pad package, which makes switching controller suitable for most applications. It is sufficient to generate 1 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 4.5V~24V. Work well in dc switchers with a -40°C~105°C TA. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Enable, Frequency Control, Phase Control, Power Good which allows efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. QUAD are the position of the terminal of the switching converters. 32 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "LTC3883". Specially, switching converter corresponds to type Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. DC regulator outputs 3.3V voltage based on test statistics. The dc to dc regulator can only accept a maximum input voltage of 24V. The value of DC to DC voltage regulator is set to ALSO OPERATES IN PUSH-PULL MODE in order to better satisfy the requirement. PolyPhase? series dc to dc voltage regulator belong to this series.
LTC3883EUH-1#TRPBF Features
Transistor Driver Outputs
Enable, Frequency Control, Phase Control, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN PUSH-PULL MODE
LTC3883EUH-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3883EUH-1#TRPBF DC to DC converter applications.
- Electric water heaters
- Ball screw pair
- Computer monitoring equipment of building
- Electric heating, lighting
- Solar power plants
- Nuclear power plants
- Post equipment
- Various CNC machine tools
- Scientific testing
- Medical monitoring systems
