LTC3883IUH-1
| Parameters | |
|---|---|
| Voltage - Supply (Vcc/Vdd) | 4.5V~24V |
| Control Features | Enable, Frequency Control, Phase Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Serial Interfaces | I2C, PMBus |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN PUSH-PULL MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3883 |
| JESD-30 Code | S-PQCC-N32 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
LTC3883IUH-1 Overview
It comes in the 32-WFQFN Exposed Pad package, which makes switching controller suitable for most applications. 1 outputs are supported by the dc motor controller. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~24V volts and has 4.5V~24V supply voltage. Work well in dc switchers with a -40°C~125°C TJ. dc dc regulators can be carried out with Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Phase Control, Power Good. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at QUAD. The 32 terminations can be used for a wide range of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. Search for "LTC3883" to find other relevant dc to dc converter ics. Switching converter type is specifically Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 4.5V. The test statistics indicate that DC regulator outputs a voltage of 3.3V. The dc to dc regulator can only accept a maximum input voltage of 24V. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN PUSH-PULL MODE so that the need can be met more directly. There are several dc to dc voltage regulator in the PolyPhase? series.
LTC3883IUH-1 Features
Transistor Driver Outputs
Enable, Frequency Control, Phase Control, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN PUSH-PULL MODE
LTC3883IUH-1 Applications
There are a lot of Linear Technology/Analog Devices LTC3883IUH-1 DC to DC converter applications.
- Wind power
- Direct power supply system
- Electric heating, lighting
- Nuclear power plants
- Handheld GPS
- Industrial robots
- Linear guide
- Shearing machines
- Hydrogen power
- Television equipment
