LTC4058EDD-4.2#PBF
| Parameters | |
|---|---|
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 950mA |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4058 |
| Pin Count | 8 |
| Output Voltage | 4.2V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 4.25V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 500mA |
| Adjustable Threshold | YES |
| Min Input Voltage | 4.25V |
| Max Input Voltage | 6.5V |
| Nominal Input Voltage | 6.5V |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Programmable Features | Current |
LTC4058EDD-4.2#PBF Overview
The package that has it is the Tube package.We've included it in the 8-WFDFN Exposed Pad package so that it's easier to use.The mounting type of the device is Surface Mount.The correct temperature setting is -40°C~85°C TA.An analog IC of POWER SUPPLY SUPPORT CIRCUIT is used in this device.To charge the device, you need Constant - Programmable current.The base part number LTC4058 represents its related parts.I have found that the number of terminations found in it as a whole is 8.There are 8 pins on it.It is possible to program features such as Current.According to the manufacturer, it is rated at 950mA at maximum charging current.For the product to work properly, 8 pins must be connected in order to make it work.The number of channels available is 1.If it runs off of a 5V battery, then it should be able to run continuously.There is no damage to the device if an input voltage of 6.5V is applied.In the case of 4.2V, the output voltage is likely to produce high efficiency.In order to operate, an output current of 500mA is used.Devices in this category are classified as Power Management Circuits.Using a supply voltage as low as 4.25V will allow it to function.Regarding the power supply for the part, it is set to 5V.There is a minimum input voltage of 4.25V volts.This device can accept up to 6.5V volts of input voltage.
LTC4058EDD-4.2#PBF Features
1 channels
Power Management Circuits subcategory
8-WFDFN Exposed Pad package
LTC4058EDD-4.2#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4058EDD-4.2#PBF Battery Chargers ICs applications.
- Home appliances
- Man lift
- Portable devices
- Electric vehicles
- Automotive/electrical vehicle
- Robot
- Tablets
- Marine buoy lights
- Maintenance shops
- MP3, MP4 player
