LTC4075HVXEDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4075 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Output Voltage | 4.2V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.3V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 950mA |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.2V |
| Min Input Voltage | 4.3V |
| Max Input Voltage | 22V |
| Supply Current-Max (Isup) | 0.8mA |
| Nominal Input Voltage | 5.5V |
| Fault Protection | Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 950mA |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC4075HVXEDD#PBF Overview
This can be found in the Tube package.The 10-WFDFN Exposed Pad package includes it as a convenience.The device's mounting type is Surface Mount.This is the right thing to do: set the temperature to -40°C~85°C TA.There is an analog IC of POWER SUPPLY SUPPORT CIRCUIT used in this device.The device cannot be charged without Constant - Programmable current flowing through it.It is possible to find related parts of this device by using the base part number LTC4075.As a whole, it contains 10 terminations.This board has 10 pins, making it very simple to construct.Serveral programmable features like Current.On the device, there is 950mA maximum charging current listed.The operation?are 10 pins.This application has a total of 1 channels that can be used.Batteries with 5V can be used to power it.In order for the device to operate properly, the supply voltage should not exceed 5.5V.When the output voltage is 4.2V, high efficiency is possible.In order to operate, it must have a current of 950mA at the output.Devices belonging to subcategory Power Management Circuits include this device.The device can operate at as low a supply voltage as possible, such as 4.3V.It was determined during the design process that Vsup (maximum supply voltage) should be set to 0.8mA.The part's power supply is set to a value of 5V.The input voltage is set to 4.3V volts.Voltage input can be as low as 22V volts at its maximum.This operation requires a voltage of 4.2V as the maximum output supply voltage.
LTC4075HVXEDD#PBF Features
1 channels
Power Management Circuits subcategory
10-WFDFN Exposed Pad package
LTC4075HVXEDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4075HVXEDD#PBF Battery Chargers ICs applications.
- Power tools
- Maintenance shops
- Trash compactors
- Battery backup applications
- Fleet management
- Crosswalk marker lights
- Instruments and meters
- Electric lift car
- Fast charge
- Mobile lighting
