LTC4076EDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4076 |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-N8 |
| Qualification Status | Not Qualified |
| Output Voltage | 4.2V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Interface | USB |
| Max Supply Voltage | 8V |
| Min Supply Voltage | 4.3V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 800mA |
| Adjustable Threshold | NO |
| Min Input Voltage | 4.3V |
| Max Input Voltage | 8V |
| Nominal Input Voltage | 8V |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 950mA |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC4076EDD#PBF Overview
It is contained in the package Tube.The product comes in the package of a 10-WFDFN Exposed Pad.The device's mounting type is Surface Mount.This is the right thing to do: set the temperature to -40°C~85°C TA.It uses an analog integrated circuit of type POWER SUPPLY SUPPORT CIRCUIT.The device requires Constant - Programmable of current to charge.It is possible to find the related parts to the base part number LTC4076.The number of terminations found in it is 8 as a whole.There are 10 pins on it, so it has a very simple design.The unit is equipped with a number of programmable features, including Current.The device has a maximum charging current of 950mA.It is necessary to connect the 10 pins during the installation process of this product.Channels are available in a total of 2.In theory, it should be able to run on a battery that has a voltage of 5VV.A supply voltage of no more than 8V is required for the device to operate properly.In the case of 4.2V, the output voltage is likely to produce high efficiency.The operation is performed with an output current of 800mA.The device falls under the Power Management Circuits subcategory.This circuit can function at a low supply voltage, such as 4.3VV.Regarding the power supply for the part, it is set to 5V.There is a minimum input voltage of 4.3V volts.It can accept a maximum input voltage of 8V volts.
LTC4076EDD#PBF Features
2 channels
Power Management Circuits subcategory
10-WFDFN Exposed Pad package
LTC4076EDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4076EDD#PBF Battery Chargers ICs applications.
- Medical
- Power tools
- Wireless headphones
- Forklift
- Industrial
- Battery backup applications
- Fast charge
- Tablets
- Industrial handhelds
- Remote control toys
