M74HC173RM13TR
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M74HC173 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 84MHz |
| Propagation Delay | 145 ns |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 25ns @ 6V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 29000000Hz |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
M74HC173RM13TR Overview
The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. There is an embedded version in the package Tape & Reel (TR). This output is configured with Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. -55°C~125°C TAis the operating temperature. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74HCseries of FPGAs. In order for it to function properly, its output frequency should not exceed 84MHz. The list contains 1 elements. It consumes 4μA of quiescent A total of 16terminations have been recorded. If you search by M74HC173, you will find similar parts. The power source is powered by 4.5V. Its input capacitance is 5pF farads. It belongs to the family of electronic devices known as HC/UH. The electronic part is mounted in the way of Surface Mount. A total of 16pins are provided on this board. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. It is designed with a number of bits of 4. It reaches the maximum supply voltage (Vsup) at 6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. The superior flexibility of this product is achieved by using 4 circuits. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. A total of 2/6V power supplies are needed to run it. It has 3 output lines to operate.
M74HC173RM13TR Features
Tape & Reel (TR) package
74HC series
16 pins
4 Bits
2/6V power supplies
M74HC173RM13TR Applications
There are a lot of STMicroelectronics M74HC173RM13TR Flip Flops applications.
- Asynchronous counter
- ESD protection
- Guaranteed simultaneous switching noise level
- EMI reduction circuitry
- Load Control
- Data transfer
- Cold spare funcion
- Memory
- Set-reset capability
- Circuit Design
