M74HC174TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M74HC174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Number of Bits | 6 |
| Clock Frequency | 66MHz |
| Propagation Delay | 220 ns |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 23ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 6 |
| fmax-Min | 28 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 24000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC174TTR Overview
The item is packaged in 16-TSSOP (0.173, 4.40mm Width)cases. It is included in the package Tape & Reel (TR). In the configuration, Non-Invertedis used as the output. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. In the operating environment, the temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74HCseries contain this type of chip. Its output frequency should not exceed 66MHz Hz. A total of 1elements are present in it. This process consumes 4μA quiescents. There have been 16 terminations. Members of the M74HC174family make up this object. A voltage of 4.5V is used to power it. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Devices in the HC/UHfamily are electronic devices. Electronic part Surface Mountis mounted in the way. As you can see from the design, it has pins with 16. A Positive Edgeclock edge trigger is used in this device. The part you are looking for is included in FF/Latches. There are 6bits in this flip flop. Vsup reaches 6V, the maximal supply voltage. Normal operation requires a supply voltage (Vsup) above 2V. Its superior flexibility is attributed to its use of 7 circuits. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. It has 6 output lines to operate.
M74HC174TTR Features
Tape & Reel (TR) package
74HC series
16 pins
6 Bits
M74HC174TTR Applications
There are a lot of STMicroelectronics M74HC174TTR Flip Flops applications.
- CMOS Process
- Counters
- Data storage
- Individual Asynchronous Resets
- Storage registers
- Asynchronous counter
- Parallel data storage
- Communications
- Divide a clock signal by 2 or 4
- Latch
