M74HC574RM13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M74HC57 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 2/6V |
| Voltage | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Clock Frequency | 90MHz |
| Propagation Delay | 190 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 19 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 32ns @ 6V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.45mm |
| Length | 13mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
M74HC574RM13TR Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. Package Tape & Reel (TR)embeds it. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. Surface Mountis in the way of this electric part. The supply voltage is set to 2V~6V. In the operating environment, the temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. It is a type of FPGA belonging to the 74HC series. A frequency of 90MHzshould be the maximum output frequency. D latch consists of 1 elements. It has been determined that there have been 20 terminations. The M74HC57 family contains it. It is powered from a supply voltage of 4.5V. A JK flip flop with a 5pFfarad input capacitance is used here. Electronic devices of this type belong to the HC/UHfamily. This electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. This device has Positive Edgeas its clock edge trigger type. There is a FF/Latchesbase part number assigned to the RS flip flops. The design is based on 8bits. The superior flexibility of this product is achieved by using 8 circuits. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. A power supply of 2/6Vis required to operate it. A D flip flop with 2embedded ports is available. With an output current of 7.8mA, it is possible to design the device in any way you want. In order for the chip to function, it has 3output lines. As a result, it consumes 4μA of quiescent current without being affected by external factors.
M74HC574RM13TR Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies
M74HC574RM13TR Applications
There are a lot of STMicroelectronics M74HC574RM13TR Flip Flops applications.
- Supports Live Insertion
- Differential Individual
- Bounce elimination switch
- Modulo – n – counter
- Instrumentation
- Latch-up performance
- Divide a clock signal by 2 or 4
- Balanced Propagation Delays
- Computing
- Frequency Dividers
