M74HC74TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 67MHz |
| Propagation Delay | 225 ns |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 26ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC74TTR Overview
14-TSSOP (0.173, 4.40mm Width)is the packaging method. It is contained within the Tape & Reel (TR)package. As configured, the output uses Differential. This trigger uses the value Positive Edge. Surface Mountmounts this electrical part. A voltage of 2V~6Vis required for its operation. In the operating environment, the temperature is -55°C~125°C TA. D-Typeis the type of this D latch. JK flip flop is a part of the 74HCseries of FPGAs. A frequency of 67MHzshould not be exceeded by its output. As a result, it consumes 2μA quiescent current and is not affected by external forces. The number of terminations is 14. The M74HC74 family contains it. It is powered from a supply voltage of 4.5V. A 5pFfarad input capacitance is provided by this T flip flop. In this case, the D flip flop belongs to the HC/UHfamily. It is mounted by the way of Surface Mount. It is designed with 14 pins. A Positive Edgeclock edge trigger is used in this device. It is included in FF/Latches. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. A normal operating voltage (Vsup) should remain above 2V. Despite its superior flexibility, it relies on 2 circuits to achieve it. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. There are no output lines on the JK flip flop.
M74HC74TTR Features
Tape & Reel (TR) package
74HC series
14 pins
M74HC74TTR Applications
There are a lot of STMicroelectronics M74HC74TTR Flip Flops applications.
- ESD protection
- Data transfer
- Asynchronous counter
- Digital electronics systems
- Frequency division
- 2 – Bit synchronous counter
- Individual Asynchronous Resets
- Safety Clamp
- Memory
- Communications
