MAX15026BATD+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 23.8V |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 0.4mm |
| Base Part Number | MAX15026 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 23.8V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~2MHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 88% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX15026BATD+ Overview
Capsuled in the 14-WFDFN Exposed Pad package, the switching controller suits most application needs. This dc motor controller can be used to generate outputs with 1 numbers. Packaging for the pmic consists of Tube solid enclosures. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 4.5V~28V. Qualified to work in an dc switcher with -40°C~125°C TJ. There is a switch at 200kHz~2MHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. Current Limit, Enable, Frequency Control, Power Good is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . Various 14 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. Searching "MAX15026" will return other relevant dc to dc converter ics. Switching converter is a special type of Switching Regulator or Controllers. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 23.8V. The dc to dc regulator can only accept a maximum input voltage of 28V. It's important to remember that the dc dc regulator's normaloutput current is 4A, so you should note it down when starting a new project. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. To better satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 23.8V. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 5.5V.
MAX15026BATD+ Features
Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 23.8V
MAX15026BATD+ Applications
There are a lot of Maxim Integrated MAX15026BATD+ DC to DC converter applications.
- Fire elevators
- Grinders
- Flexible manufacturing cells
- Surge protection circuits
- Post equipment
- Remotely powered electric motors
- Alternators
- Digital display device
- Surface processing equipment
- Computer application technology
