MAX1540AETJ+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX1540 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Operating Supply Current | 1μA |
| Output Configuration | Positive |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | 5.5V~28V |
| Control Features | Current Limit, Enable, On Time Control, Power Good, Pulse Skipping, Saturation |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 170kHz~620kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 620kHz |
| Max Duty Cycle | 100 % |
| Isolation | Non-Isolated |
| Clock Sync | No |
| Output Phases | 1 |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1540AETJ+ Overview
This switching controller fits most application requirements since it is packaged in a 32-WFQFN Exposed Pad package. For 2 outputs, the dc motor controller is appropriate. PMIC packaging is solid with a Tube enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. 5.5V~28V is the operating voltage and supply voltage of the dc control. Suitable for working in an dc switcher that has a -40°C~85°C TA. Using this switching controller, it is possible to switch at 170kHz~620kHz. A generalization of dc dc regulator can be made using Surface Mount. Current Limit, Enable, On Time Control, Power Good, Pulse Skipping, Saturation provides dcdc regulator efficient switching control. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. There are a terminal (s) on the switching converters that are designed at QUAD. There are many different types of terminations for 32. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. Searching "MAX1540" will return other relevant dc to dc converter ics. 32 pins are present on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Test statistics indicate DC regulator outputs 5.5V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 5A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. This dc regulatorhas a max frequency of 620kHz. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 28V. There is 1μA supply current for it.
MAX1540AETJ+ Features
Transistor Driver Outputs
Switching Frequency: 170kHz~620kHz
Current Limit, Enable, On Time Control, Power Good, Pulse Skipping, Saturation
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
MAX1540AETJ+ Applications
There are a lot of Maxim Integrated MAX1540AETJ+ DC to DC converter applications.
- Milling machines
- Correction machines
- seismic instrument power circuits
- Computed tomography (CT)
- Adjustable voltage or current linear circuits
- Electric water heaters
- Terrestrial set-top boxes
- USB circuits
- Packaging
- Laboratories
