MAX1667EAP
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX1667 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 18V |
| Interface | I2C |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Input Voltage (Min) | 7.5V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 4A |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | PUSH-PULL |
| Switching Frequency-Max | 310kHz |
| Battery Chemistry | Multi-Chemistry |
| Voltage - Supply (Max) | 28V |
| Charge Current - Max | 4A 3A 1A |
| Battery Pack Voltage | 18.4V Max |
| Height Seated (Max) | 1.99mm |
| Length | 7.2mm |
| Width | 5.29mm |
| RoHS Status | Non-RoHS Compliant |
MAX1667EAP Overview
You can find it in the Tube package.With this item, there is a 20-SSOP (0.209, 5.30mm Width) package that comes with it.There is a type of mounting for this device: Surface Mount.This is the right thing to do: set the temperature to -40°C~85°C TA.In order for this device to function, it utilizes an analog integrated circuit called BATTERY CHARGE CONTROLLER.It is possible to find the related parts to the base part number MAX1667.In general, the number of terminations found within it is 20 as a whole.The battery pack has 18.4V Max.Total number of pins: 20.As far as the charging current is concerned, it is 4A 3A 1A at full charge.Those devices that have a maximum supply voltage of 28V are recommended for use.A 18V voltage input is present in the device.Input voltage should not be less than 7.5V volts.At most, the part has a switching frequency of 310kHz.There is a maximum input voltage of 28V for this device.
MAX1667EAP Features
Battery pack voltage of 18.4V Max
20-SSOP (0.209, 5.30mm Width) package
MAX1667EAP Applications
There are a lot of Maxim Integrated MAX1667EAP Battery Chargers ICs applications.
- Tablets
- Personnel carriers
- Trash compactors
- Electric lift car
- Automotive/electrical vehicle
- Boat
- Floor scrubber
- Locomotive
- Military equipment
- Solar charging
