MAX16812ATI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-WFQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Lighting |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.759W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 125kHz~500kHz |
| Base Part Number | MAX16812 |
| Pin Count | 28 |
| Number of Outputs | 1 |
| Output Voltage | 1.5V |
| Operating Supply Voltage | 76V |
| Power Dissipation | 2.759W |
| Output Current | 1A |
| Max Supply Current | 2.5mA |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Current - Output / Channel | 2A Switch |
| Internal Switch(s) | Yes |
| High Level Output Current | 300μA |
| Low Level Output Current | 80μA |
| Dimming | Analog, PWM |
| Number of Segments | 2 |
| Switching Frequency | 500kHz |
| Voltage - Supply (Min) | 5.5V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 730μm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX16812ATI+ Overview
The 28-WFQFN Exposed Pad package conserves board space. In this LED driver, there are 1 outputs.In this case, mounting method is Surface Mount.With high efficiency and reliable performance, it emerges as a DC DC Regulator.It is able to work normally at the operating temperature of -40°C~125°C TA.There are considerable benefits for Lighting.Based on the frequency of 125kHz~500kHz, it operates on the basis of a pulse.28 terminations are used in its operation.The LED light driver is configured with a base of 0 pins.It is likely that undetermined failures will occur if the voltage supply is less than 5.5V.The number of segments is estimated to be 2.This is mounted by Surface Mount.It's under the MAX16812 base part number.In addition, it is equipped with a total of 28 pins.The Display Drivers is also assigned based on its characteristics.As long as the supply current is less than 2.5mA, this device can provide high efficiency.Loads can only be powered by 1A current.The power of systems depends on having 76V voltages inside.It is capable of fulfilling its full functionality when the switching frequency remains at 500kHz.1.5V is the voltage at the output terminal.
MAX16812ATI+ Features
Available in the 28-WFQFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 125kHz~500kHz
Supply voltage of 12V
Operating with the supply voltage of 76V
Switching frequency of 500kHz
Output voltage of 1.5V
MAX16812ATI+ Applications
There are a lot of Maxim Integrated MAX16812ATI+ LED Driver ICs applications.
- Stage Lighting and Signage
- Portable lighting
- Amusement Machines
- White LED Backlight for portable equipment
- Down lighting
- Medical surgery lighting
- Down lights
- High-end retail lighting
- Other Electronic Devices
- Gallery lighting
