MAX16833BAUE/V+T
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Applications | Automotive, Lighting |
| Max Power Dissipation | 2.089W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 100kHz~1MHz |
| Base Part Number | MAX16833 |
| Number of Outputs | 1 |
| Output Voltage | 65V |
| Operating Supply Voltage | 65V |
| Power Dissipation | 2.089W |
| Max Supply Current | 4mA |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Internal Switch(s) | No |
| High Level Output Current | 700μA |
| Low Level Output Current | 700μA |
| Dimming | Analog, PWM |
| Number of Segments | 1 |
| Voltage - Supply (Min) | 5V |
| Multiplexed Display Capability | NO |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
MAX16833BAUE/V+T Overview
In order to save board space, the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package is used. For the design of this LED driver, 1 outputs are used.In order to mount the led light driver, Surface Mount is used.With high efficiency and reliable performance, it emerges as a DC DC Controller.When the temperature is -40°C~125°C TA, it can work normally.A number of benefits are available to Automotive, Lighting.As a result, it operates in accordance with the frequency of 100kHz~1MHz.There are 16 terminations associated with it.It is configured with 16 pins as its base.Undetermined failures may occur if the voltage supply falls below 5V.Based on our estimates, there are 1 segments.Surface Mount is mounted in the way.MAX16833 is the base part number for the LED driver.As long as the maximum supply current is less than 4mA, this device is capable of providing high efficiency.The power of systems depends on having 65V voltages inside.LED drivers from the Automotive, AEC-Q100 series are essential components for a wide variety of products.65V is the voltage at the output terminal.
MAX16833BAUE/V+T Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 100kHz~1MHz
Supply voltage of 12V
Operating with the supply voltage of 65V
Output voltage of 65V
MAX16833BAUE/V+T Applications
There are a lot of Maxim Integrated MAX16833BAUE/V+T LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Refrigeration lighting
- Scanners and Handy Terminals
- A- lamps
- Industrial LED Lighting: Image Recognition Devices
- Flicker-free LED Lighting using R1580N
- Gallery lighting
- LED Lightings for Inspection Devices
- Other Electronic Devices
- Power source for accessories such as car audios, car navigation systems, and ETC systems
