MAX16992AUBA/V+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Frequency | 2.5MHz |
| Base Part Number | MAX16992 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz~2.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Duty Cycle | 85 % |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX16992AUBA/V+ Overview
In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller meets most application requirements. For outputs of 1, this dc motor controller is suitable. The pmic is packaged in Tube solid enclosure. There are Transistor Driver dc switching's output (s) that it can handle. The supply and operating voltage of the dc control are 4.5V~36V. Worked in a -40°C~125°C TJ dc switcher before. Switching can be done at 1MHz~2.5MHz with this switching controller. dc dc regulators can be carried out with Surface Mount. Current Limit, Enable, Frequency Control, Power Good is used for efficient switching control in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. switching converters terminal (s) are designed to be at DUAL. 10 terminations with various dc switching's functions. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 14V. A search for "MAX16992" will reveal other relevant dc to dc converter ics. Total pins of switching converter are 10. Switching converter is a special type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 4.5V. DC regulator outputs 36V voltage based on test statistics. In most cases, the output current of the dc dc regulator will be 6A, so note that when you start the project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 85 %. The Surface Mount makes DC switcher suitable for most applications and prototypes. Switching controllers work at 2.5MHz Hz. Users should apply 42V to operate the voltage regulator dc to dc safely and reliably. A dc to dc voltage regulator in the Automotive, AEC-Q100 series, it belongs to this family.
MAX16992AUBA/V+ Features
Transistor Driver Outputs
Switching Frequency: 1MHz~2.5MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
Frequency: 2.5MHz
MAX16992AUBA/V+ Applications
There are a lot of Maxim Integrated MAX16992AUBA/V+ DC to DC converter applications.
- Hydro power
- Nuclear power plants
- Textile machinery
- Product testing
- Radio equipment
- Driver circuits
- Ball screw pair
- Servo drive system
- Injection molding machinery
- Network technology
