MAX1744EUB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX1744 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Max Output Current | 10A |
| Operating Supply Voltage | 36V |
| Input Voltage-Nom | 5.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Control Features | Enable |
| Max Output Voltage | 5V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 330kHz |
| Max Input Voltage | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Frequency | 330kHz |
| Max Duty Cycle | 100 % |
| Height | 950μm |
| Length | 3.05mm |
| Width | 3.05mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1744EUB Overview
It comes in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, which makes switching controller suitable for most applications. There is sufficient capacity to generate switching controller for outputs 1. Packaging for the pmic consists of Tube solid enclosures. Transistor Driver dc switching's outputs (s) can be handled by it. A 4.5V~36V voltage is supplied to the dc control and used for operating it. Suitable for working in an dc switcher that has a -40°C~85°C TA. The switching controller is capable of switching at the Up to 330kHz position. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable. An analog IC SWITCHING CONTROLLER is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. 10 terminations with a variety of function. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis 5.5V volts. MAX1744 can be searched for other relevant dc to dc converter ics. There are a total of 10 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. According to the test statistics, DC regulator outputs 3.3V voltage. You should note that the dc dc regulator's usual output current is 10A. The maximum duty cycle of this voltage regulator dc to dc is set to 100 % to ensure reliability during power-up and power-down. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher's330kHz is the maximum frequency of this dc regulators. Users should apply 36V to operate the voltage regulator dc to dc safely and reliably. Because the dc switcher's maximum input voltage is 36V users must limit the voltage accordingly. There must be a 4.5V supply voltage. DC switchers cannot produce output currents greater than 10A. At its maximum, the switching converter can output 5V volts.
MAX1744EUB Features
Transistor Driver Outputs
Switching Frequency: Up to 330kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
MAX1744EUB Applications
There are a lot of Maxim Integrated MAX1744EUB DC to DC converter applications.
- Current source circuits
- Communication system
- Packaging
- Boring machines
- Industrial controllers
- Precision electronic equipment
- Printing equipment
- Radio equipment
- CMM
- Driver circuits
