MAX1910EUB+
| Parameters | |
|---|---|
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 444mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1910 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Operating Supply Voltage | 5.3V |
| Input Voltage-Nom | 3.6V |
| Power Dissipation | 444mW |
| Output Current | 120mA |
| Max Supply Current | 2.5mA |
| Input Voltage (Min) | 2.7V |
| Topology | Switched Capacitor (Charge Pump) |
| Switcher Configuration | DOUBLER INVERTER |
| Current - Output / Channel | 120mA |
| Internal Switch(s) | Yes |
| Number of Segments | 4 |
| Switching Frequency | 750kHz |
| Voltage - Supply (Min) | 2.7V |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
MAX1910EUB+ Overview
Additionally, there is a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package for saving space.These LED drivers have 1 outputs.To mount, use Surface Mount.With high efficiency, it appears as a DC DC Regulator.The LED driver is capable of operating at a temperature of -40°C~85°C TA.Backlight has many advantages.There are 10 terminations that are designed to operate with it.There are 10 pins on the base of this LED driver.It is possible that failures will occur if the voltage supply is below 2.7V.It consists of 4 segments.On the Surface Mount, a device is mounted.MAX1910 is the base part number for this LED driver.The device has 10 pins.Further, its characteristics allow it to be classified as Other Analog ICs.If the maximum current supply is less than 2.5mA, this device provides high efficiency.A load can be supplied with 120mA current.Systems require 5.3V voltage to operate.Electronic components can function properly when their switching frequency is set to 750kHz.A 5V voltage is output by it.Device operation requires 3.6V volts from the circuit.Input voltages above or equal to 2.7V provide great convenience.
MAX1910EUB+ Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~85°C TA
Operating with the supply voltage of 5.3V
Switching frequency of 750kHz
Output voltage of 5V
MAX1910EUB+ Applications
There are a lot of Maxim Integrated MAX1910EUB+ LED Driver ICs applications.
- Refrigeration lighting
- Panel lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Auxiliary lights for on-vehicle cameras
- Linear fluorescent
- Gallery lighting
- High-end retail lighting
- Stage Lighting and Signage
- Other Electronic Devices
- Portable lighting
