MAX1962EEP+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX1962 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.35V~5.5V |
| Control Features | Current Limit, Enable, Frequency Control |
| Input Voltage (Min) | 2.35V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 500kHz 1MHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 92% |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX1962EEP+T Overview
It comes in a 20-SSOP (0.154, 3.90mm Width) package, so switching controller can be used for most applications. For 1 outputs, the dc motor controller is appropriate. An enclosure of Tape & Reel (TR) is used to package the PMIC. With Transistor Driver dc switching's output (s), it is able to handle it. A 2.35V~5.5V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. Switching can be done at 500kHz 1MHz with this switching controller. It is suitable for general dc dc regulator when it is set to Surface Mount. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position DUAL . A variety of 20 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis 3.3V volts. In addition to "MAX1962", there are other relevant dc to dc converter ics you can find. In particular, switching converter is a type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 2.35V. A maximum voltage of 5.5V is accepted by the dc to dc regulator as an input voltage.
MAX1962EEP+T Features
Transistor Driver Outputs
Switching Frequency: 500kHz 1MHz
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
MAX1962EEP+T Applications
There are a lot of Maxim Integrated MAX1962EEP+T DC to DC converter applications.
- Mobile phones
- Communication system
- Automation technology
- Computer monitoring equipment of building
- Arc suppression circuits
- Packaging
- Series voltage regulation circuits
- Precision electronic equipment
- Imported equipment
- Product testing
