MAX5038AEAI15
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5038 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 1.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | 4.75V~28V |
| Control Features | Enable |
| Input Voltage (Min) | 4.75V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz 500kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Clock Sync | No |
| Height Seated (Max) | 1.99mm |
| RoHS Status | ROHS3 Compliant |
MAX5038AEAI15 Overview
It comes in a 28-SSOP (0.209, 5.30mm Width) package, so switching controller can be used for most applications. The dc motor controller is adquate to generate for 2 outputs. PMIC packaging is solid with a Tube enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 4.75V~28V. Worked in a -40°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 250kHz 500kHz. dc dc regulators can be carried out with Surface Mount. Enable is used for efficient switching control in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a DUAL terminal on the switching converters. An array of 28 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. 5V nominal DC switcher's voltage input. MAX5038 can be used to locate other relevant dc to dc converter ics. 28 pins are present on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.75V. The test statistics indicate that DC regulator outputs a voltage of 1.5V. This dc to dc regulator accepts only 5.5V input voltage at most. You should note down the dc dc regulator's usual output current of 4A when you start a project. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. A circuit should contain 28V in order to ensure the voltage regulator dc to dc runs safely and reliably.
MAX5038AEAI15 Features
Transistor Driver Outputs
Switching Frequency: 250kHz 500kHz
Enable
PULSE WIDTH MODULATION
MAX5038AEAI15 Applications
There are a lot of Maxim Integrated MAX5038AEAI15 DC to DC converter applications.
- Medical equipment
- Plate bending machines
- Terrestrial set-top boxes
- Precision electronic equipment
- Linear guide
- Flaw detection equipment
- Direct power supply system
- Surface processing equipment
- Sensitive electronic devices
- Automation technology
