MAX5038AEAI25
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5038 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 2.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | 4.75V~28V |
| Control Features | Enable |
| Input Voltage (Min) | 4.75V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz 500kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Clock Sync | No |
| Height Seated (Max) | 1.99mm |
| RoHS Status | ROHS3 Compliant |
MAX5038AEAI25 Overview
It comes in a 28-SSOP (0.209, 5.30mm Width) package, so switching controller can be used for most applications. For outputs of 2, this dc motor controller is suitable. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control operates at 4.75V~28V and has a 4.75V~28V supply voltage. A -40°C~85°C TA dc switcher is not a problem. The switching controller can be switched at 250kHz 500kHz. dc dc regulator is made easier with Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable. SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. The 28 terminations can be used for a wide range of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input is 5V. Other relevant dc to dc converter ics can be found by searching "MAX5038". There are a total of 28 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. It is recommended that the input voltage of the dc dc voltage regulator be 4.75V. Based on the test statistics, DC regulator outputs voltage 2.5V. At most, the dc to dc regulator accepts 5.5V input voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 4A. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. Users should apply 28V to operate the voltage regulator dc to dc safely and reliably.
MAX5038AEAI25 Features
Transistor Driver Outputs
Switching Frequency: 250kHz 500kHz
Enable
PULSE WIDTH MODULATION
MAX5038AEAI25 Applications
There are a lot of Maxim Integrated MAX5038AEAI25 DC to DC converter applications.
- Analog precision reference circuits
- Network technology
- Combined machine tools
- Drilling machines
- Elevator lighting
- Adjustable voltage or current linear circuits
- Photovoltaic power
- Grinders
- Solar power plants
- Current source circuits
