MAX5070AAUA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5070 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 26.5V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 32μA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 10.8V~30V |
| Quiescent Current | 37μA |
| Control Features | Frequency Control |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 20kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 22 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 96 % |
| Input Current | 3mA |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5070AAUA Overview
This switching controller fits most application requirements since it is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. It is sufficient to generate 1 outputs with this dc motor controller. An enclosure of Tube is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control operates at 10.8V~30V and has a 10.8V~30V supply voltage. Work well in dc switchers with a -40°C~125°C TJ. Switching can be done at 20kHz~1MHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. Frequency Control is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. 8 terminations with various dc switching's functions. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. In addition to "MAX5070", there are other relevant dc to dc converter ics you can find. There are only 8 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 5V voltage. If you start a project, note down the dc dc regulator's usual output current of 2A. The maximum duty cycle of this voltage regulator dc to dc is set to 96 % to ensure reliability during power-up and power-down. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sIt is estimated that this dc regulatorhas a maximum frequency of 1MHz. Users should apply 26.5V to operate the voltage regulator dc to dc safely and reliably. DC switchings that are dormant use 37μA. It runs on a supply current of 32μA. If there is 3mA current flow input, then the switching converter could operate.
MAX5070AAUA Features
Transistor Driver Outputs
Switching Frequency: 20kHz~1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
MAX5070AAUA Applications
There are a lot of Maxim Integrated MAX5070AAUA DC to DC converter applications.
- Correction machines
- Experimental setup
- Access control systems
- Production lines
- Medical equipment
- Household control circuits
- Electric water heaters
- Smoke exhaust equipment
- CMM
- Photovoltaic power
