MAX6954ATL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 40 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 40 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BARGRAPH |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Pin Count | 40 |
| Number of Outputs | 19 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Temperature Grade | AUTOMOTIVE |
| Interface | Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation-Max | 1.333W |
| Operating Supply Current | 22mA |
| Max Supply Current | 30mA |
| Current - Output | 935mA |
| Voltage - Output | 5.3V |
| Min Input Voltage | 2.7V |
| Frequency - Switching | 8MHz |
| Max Input Voltage | 5.5V |
| Number of Segments | 128 |
| Multiplexed Display Capability | YES |
| Display Mode | DIGIT |
| Number of Digits/Characters | 16-DIGIT |
| Height | 730μm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX6954ATL Overview
LED drivers design with 19 outputs.In this case, it uses 40 terminations.The base of this board is configured as 40 pins.The number of segments is estimated to be 128.The mount is on its way to Surface Mount.It's acceptable for the voltage to be 5.5V.There is 5.3V voltage output from this device.This device contains 40 pins.In addition, it can be classified as Display Drivers according to its characteristics.With a minimum input voltage of 2.7V volts, it can operate.To meet high efficiency standards, it works with a voltage of 2.7V.There is 5.5V maximum value for supply current.If the maximum supply current is less than 30mA, the device is capable of providing high efficiency.It is important that the operating temperature not exceed 125°C in order to ensure stable operation.Stable operation requires a temperature higher than -40°C.The power of systems depends on having 5.5V voltages inside.Set the part output current to 935mA.Furthermore, this LED driver has a BARGRAPH characteristic.
MAX6954ATL Features
Supply voltage of 3.3V
Operating with the supply voltage of 5.5V
BARGRAPH
MAX6954ATL Applications
There are a lot of Maxim Integrated MAX6954ATL LED Driver ICs applications.
- Stage Lighting and Signage
- Gallery lighting
- LED backlight driver for LCD displays for portable equipment
- Down lighting
- White LED Backlight for portable equipment
- LED headlights
- Down lights
- General lighting
- Stage and Studio lighting
- Sports Facility Lighting
