MAX712CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX712 |
| Pin Count | 16 |
| Output Voltage | 18V |
| Input Voltage-Nom | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Current | 2A |
| Max Output Voltage | 18V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 10mA |
| Nominal Input Voltage | 5.5V |
| Switcher Configuration | SINGLE |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1 ~ 16 |
| Current - Charging | Constant |
| Max Charge Current | 2A |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX712CPE+ Overview
I found it in the Tube package, which comes with everything you need.A 16-DIP (0.300, 7.62mm) package is included with this item as part of its contents.Mounting type is Through Hole.It is recommended that the temperature be set to 0°C~70°C TA in order to ensure reliable performance.In order for the device to function, an analog IC named BATTERY CHARGE CONTROLLER must be used.A charge of Constant current is required to be applied to the device.Based on the base part number MAX712, it is possible to find related parts for this device.It has 16 terminations.Pins 16 are included.Product functionality is dependent on 16 pins.If it runs off of a 5V battery, then it should be able to run continuously.Withstanding a voltage of 5.5V, it is a reliable piece of equipment.When the output voltage is 18V, high efficiency is possible.In order to operate, an output current of 2A is used.Subcategory 0 is home to this device.At a low supply voltage, such as 4.5V, it can operate to the best of its ability.Amounting is in line with Through Hole.In order to ensure optimum supply voltage, the maximum voltage setting is set to 10mA.The power supply for this part is set to 5V.5V is the input voltage for the device.There is a maximum input voltage of 5.5V volts that it can take.Voltage 18V is the maximum output voltage needed for this operation.
MAX712CPE+ Features
Power Management Circuits subcategory
16-DIP (0.300, 7.62mm) package
MAX712CPE+ Applications
There are a lot of Maxim Integrated MAX712CPE+ Battery Chargers ICs applications.
- Home appliances
- High end, feature-rich consumer
- Various chargers
- Portable speaker systems
- Electric boat
- Portable medical equipment
- Mobile lighting
- Smart speakers
- Portable devices
- Automotive/electrical vehicle
