MAX741UCAP+
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX741 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Voltage - Supply (Vcc/Vdd) | 2.7V~15.5V |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 2.7V |
| Topology | Buck, Boost |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 3.5mA |
| Synchronous Rectifier | No |
| Switcher Configuration | PUSH-PULL |
| Clock Sync | Yes |
| Length | 7.2mm |
| Width | 5.29mm |
| RoHS Status | ROHS3 Compliant |
MAX741UCAP+ Overview
It comes in a 20-SSOP (0.209, 5.30mm Width) package, so switching controller can be used for most applications. For outputs of 1, this dc motor controller is suitable. The pmic is packaged in Tube solid enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control operates at 2.7V~15.5V and has a 2.7V~15.5V supply voltage. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. A generalization of dc dc regulator can be made using Surface Mount. Switching control is made easier with the dcdc regulator's Frequency Control, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. There are many different types of terminations for 20. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. Other relevant dc to dc converter ics will be returned if you search "MAX741". Input voltage of dc dc voltage regulator must be 2.7V. A value of 1A is output as the maximum value of current. 3.5mA more than 3.5mA current should be supplied to the controller.
MAX741UCAP+ Features
Transistor Driver Outputs
Frequency Control, Soft Start
PULSE WIDTH MODULATION
MAX741UCAP+ Applications
There are a lot of Maxim Integrated MAX741UCAP+ DC to DC converter applications.
- Surface processing equipment
- Electrical distribution systems
- Planers
- Large fire protection systems
- Wind power
- Drilling machines
- Geothermal power
- seismic instrument power circuits
- Bending machines
- Wide-range voltage regulation circuits
