MAX741UCPP+
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 2.54mm |
| JESD-30 Code | R-PDIP-T20 |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Voltage - Supply (Vcc/Vdd) | 2.7V~15.5V |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 2.7V |
| Topology | Buck, Boost |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PUSH-PULL |
| Clock Sync | Yes |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MAX741UCPP+ Overview
With a 20-DIP (0.300, 7.62mm) package, the switching controller is suitable for a wide range of applications. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tube. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sVoltages 2.7V~15.5V are the dc control's supply voltage and operating voltage, respectively. Suitable for a 0°C~70°C TA dc switcher. dc dc regulator is made easier with Through Hole. To provide efficient switching control, Frequency Control, Soft Start is included in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . There are many different types of terminations for 20. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. This dc dc voltage regulator should be powered by a voltage of 2.7V. 1A is the greatest value switching converter outputs as current.
MAX741UCPP+ Features
Transistor Driver Outputs
Frequency Control, Soft Start
PULSE WIDTH MODULATION
MAX741UCPP+ Applications
There are a lot of Rochester Electronics, LLC MAX741UCPP+ DC to DC converter applications.
- Household control circuits
- Hydro power
- Communication system
- Sink circuits
- Power supplies of electronic gadgets
- Precision electronic equipment
- Sensitive electronic devices
- Milling machines
- Production lines
- Imported equipment
