MAX767CAP+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX767 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.35V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 340kHz |
| Duty Cycle (Max) | 95% |
| Length | 7.2mm |
| Width | 5.29mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX767CAP+T Overview
It comes in the 20-SSOP (0.209, 5.30mm Width) package, which makes switching controller suitable for most applications. For outputs of 1, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of handling Transistor Driver dc switching's outputs (s). 4.5V~5.5V is the supply voltage and the operating voltage of the dc control. Suitable for work in a 0°C~70°C TA dc switcher. It can switch at 200kHz 300kHz. The Surface Mount makes it ideal for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. There are many different types of terminations for 20. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. You can find other relevant dc to dc converter ics by searching "MAX767". 20 pins are present on switching converter. Switching converter type is specifically Switching Regulator or Controllers. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. According to the test statistics, DC regulator outputs 3.35V voltage. You should note that the dc dc regulator's usual output current is 10A. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulator340kHz has the maximum frequency. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 5.5V.
MAX767CAP+T Features
Transistor Driver Outputs
Switching Frequency: 200kHz 300kHz
Enable, Soft Start
PULSE WIDTH MODULATION
MAX767CAP+T Applications
There are a lot of Maxim Integrated MAX767CAP+T DC to DC converter applications.
- Computer application technology
- Servo drive system
- Lathes
- Photovoltaic power
- Post equipment
- Direct power supply system
- Plate bending machines
- Scientific research
- CNC system
- Surface processing equipment
