MAX798ESE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | MAX798 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 96 % |
| Output Voltage | 6V |
| Output Type | Transistor Driver |
| Max Output Current | 10A |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 5V~30V |
| Control Features | Enable, Pulse Skipping, Soft Start |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz 300kHz |
| Max Input Voltage | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 350kHz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX798ESE+ Overview
As a result of 16-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. This dc motor controller can be used to generate outputs with 1 numbers. A solid enclosure of Tube surrounds pmic. The program can handle Transistor Driver dc switching's outputs (s). 5V~30V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~85°C TA dc switcher. In this switching controller, the switch can be set to 150kHz 300kHz. Surface Mount makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable, Pulse Skipping, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of dc switching's functions can be performed on 16 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis set to 15V. You can find other relevant dc to dc converter ics by searching "MAX798". Pins number 16 of switching converter in total. Switching converter is a special type of Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 6V. The dc dc regulator's usual output current is 10A, which should be noted down when you start a project. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator's maximum frequency is 350kHz. A circuit should contain 30V in order to ensure the voltage regulator dc to dc runs safely and reliably. The maximum input voltage of this dc switcher is 30V, so users must limit the voltage accordingly. A voltage of 4.5V must be present in the supply. In this case, the dc switcher won't produce more than 10A watts of output current.
MAX798ESE+ Features
Transistor Driver Outputs
Switching Frequency: 150kHz 300kHz
Enable, Pulse Skipping, Soft Start
PULSE WIDTH MODULATION
MAX798ESE+ Applications
There are a lot of Maxim Integrated MAX798ESE+ DC to DC converter applications.
- Sensitive electronic devices
- Computer rooms
- Electrical distribution systems
- Surface processing equipment
- Series voltage regulation circuits
- Access control systems
- Textile machinery
- Injection molding machinery
- Driver circuits
- Product burn-in
