MAX8529EEG+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX8529 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | 4.75V~23V |
| Control Features | Current Limit, Enable, Frequency Control, Reset |
| Input Voltage (Min) | 4.75V |
| Topology | Buck, Buck-Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 600kHz~1.2MHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1.38MHz |
| Duty Cycle | 90 % |
| Height Seated (Max) | 1.73mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8529EEG+T Overview
Capsuled in the 24-SSOP (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 2 output generation. Tape & Reel (TR) solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. dc control's supply and operating voltages are 4.75V~23V. Qualified to work in a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the 600kHz~1.2MHz position. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Reset which allows efficient switching control. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. 24 terminations with various dc switching's functions. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. In addition to "MAX8529", there are other relevant dc to dc converter ics you can find. There are a total of 24 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 4.75V. Based on the test statistics, DC regulator outputs voltage 18V. This dc to dc regulator accepts only 5.5V input voltage at most. It's important to remember that the dc dc regulator's normaloutput current is 6A, so you should note it down when starting a new project. The Surface Mount makes DC switcher suitable for most applications and prototypes. This dc regulatorhas a max frequency of 1.38MHz.
MAX8529EEG+T Features
Transistor Driver Outputs
Switching Frequency: 600kHz~1.2MHz
Current Limit, Enable, Frequency Control, Reset
PULSE WIDTH MODULATION
MAX8529EEG+T Applications
There are a lot of Maxim Integrated MAX8529EEG+T DC to DC converter applications.
- Emergency lighting monitoring equipment
- Machining centers
- Power supplies of electronic gadgets
- Pipe bending machines
- Energy management systems
- Window air conditioners
- Constant current circuits
- Packaging
- Digital precision reference circuits
- Fire elevators
