MAX8599ETE+

16 Terminals 4.5V~28V 16-Pin MAX8599 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 200kHz~1.4MHz Transistor Driver

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX8599ETE+
Package: 16-WQFN Exposed Pad
Datasheet: PDF
Stock: 182
Description: 16 Terminals 4.5V~28V 16-Pin MAX8599 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 200kHz~1.4MHz Transistor Driver (Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-WQFN Exposed Pad
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2005
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Base Part Number	MAX8599
Function	Step-Down
Number of Outputs	1
Output Voltage	28V
Output Type	Transistor Driver
Operating Supply Voltage	28V
Input Voltage-Nom	5V
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	5mA
Nominal Supply Current	3.4A
Output Configuration	Positive
Output Current	20A
Voltage - Supply (Vcc/Vdd)	4.5V~28V
Control Features	Current Limit, Enable, Frequency Control, Power Good, Soft Start
Input Voltage (Min)	4.5V
Topology	Buck
Control Mode	VOLTAGE-MODE
Frequency - Switching	200kHz~1.4MHz
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Switcher Configuration	PUSH-PULL
Max Frequency	1.4MHz
Max Duty Cycle	99.5 %
Clock Sync	No
Duty Cycle	99.5 %
Height Seated (Max)	0.8mm
Length	4mm
Width	4mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX8599ETE+ Overview

In the 16-WQFN Exposed Pad package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. The pmic is packaged in Tube solid enclosure. The program can handle Transistor Driver dc switching's outputs (s). Voltages 4.5V~28V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~85°C TA. Using this switching controller, it is possible to switch at 200kHz~1.4MHz. The Surface Mount makes it ideal for general dc dc regulator. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start for efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at QUAD . A variety of terminations with 16 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5V. Searching "MAX8599" will return other relevant dc to dc converter ics. Total pins of switching converter are 16. There is a particular type of Switching Regulator or Controllers in switching converter. dc dc voltage regulators should have a minimum input voltage of 4.5V. Test statistics indicate DC regulator outputs 28V voltage. If you start a project, note down the dc dc regulator's usual output current of 20A. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 99.5 %. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. There is a maximum frequency of 1.4MHz for this dc regulators. It is suggested that users apply 28V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. It runs on a supply current of 5mA. For this the controllers dc, the nominal current supply is 3.4A.

MAX8599ETE+ Features

Transistor Driver Outputs
Switching Frequency: 200kHz~1.4MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 99.5 %