MAX8601ETD+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | MAX8601 |
| Pin Count | 14 |
| Output Voltage | 4.2V |
| Max Output Current | 320mA |
| Operating Supply Voltage | 7V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 4.15V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 750μA |
| Output Current | 1A |
| Adjustable Threshold | NO |
| Max Output Voltage | 4.234V |
| Max Input Voltage | 14V |
| Nominal Input Voltage | 14V |
| Min Output Voltage | 4.166V |
| Fault Protection | Over Temperature, Over Voltage |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Programmable Features | Timer |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.2V |
| Height | 3.1mm |
| Length | 3.1mm |
| Width | 700μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8601ETD+T Overview
There is a package for Tape & Reel (TR) in which it can be found.There is a 14-WFDFN Exposed Pad package included with this item that you will need to take care of.The device's mounting type is Surface Mount.Temperature -40°C~85°C TA is recommended for reliable performance.In order to operate, the device relies on an analog IC named POWER SUPPLY SUPPORT CIRCUIT.The device requires Constant - Programmable of current to charge.It is possible to find related parts of this device by using the base part number MAX8601.It contains 14 terminations.4.2V is the voltage for the battery pack.The device is equipped with a total of 14 pins.Several programmable features, including Timer.To operate the product, it is necessary that 14 pins be inserted into the device.Currently, there are a total of 1 channels available for use in the application.It should be able to run off of a 5V battery.With a 7V supply voltage, it is capable of withstanding the operation of the device.Ideally, when the output voltage of the device is set to 4.2V, you will be able to achieve the highest degree of efficiency.The output current is set to 1A in this case.Subcategory 0 is home to this device.It is capable of functioning at a voltage as low as possible, for example 4.15V voltage for this circuit is used.A mounting requires that it align itself with Surface Mount.When it comes to the part's power supply, it is set to 5V.This gadget's power supply has a current of 750μA flowing through it.As a rule of thumb, the supply voltage needs to be set to 7V for optimum efficiency.Input voltage is limited to 14V volts.Voltage 4.234V is the maximum output voltage needed for this operation.There is a reduction in the maximum output current during operation to 320mA.
MAX8601ETD+T Features
Battery pack voltage of 4.2V
1 channels
Power Management Circuits subcategory
14-WFDFN Exposed Pad package
MAX8601ETD+T Applications
There are a lot of Maxim Integrated MAX8601ETD+T Battery Chargers ICs applications.
- Instruments and meters
- Charging cradle for wearable devices
- Robot
- Electric tour bus
- Portable medical instruments
- GPS tracker
- Floor scrubber
- Various chargers
- Wireless headphones
- High end, feature-rich consumer
