MAX865EUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 330mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX865 |
| Function | Ratiometric |
| Number of Outputs | 2 |
| Output Voltage | 12V |
| Output Type | Fixed |
| Voltage - Input (Min) | 1.5V |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Nominal Supply Current | 600μA |
| Output Configuration | Positive or Negative |
| Current - Output | 20mA |
| Voltage - Output (Min/Fixed) | -Vin 2Vin |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 18kHz~34kHz |
| Supply Current-Max (Isup) | 1.15mA |
| Synchronous Rectifier | No |
| Switcher Configuration | DOUBLER INVERTER |
| Max Duty Cycle | 50 % |
| Nominal Output Voltage | 12V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3.05mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX865EUA+T Overview
Using the Tape & Reel (TR) package, this voltage regulator optimizes the performance of the voltage regulator 12v. This harley voltage regulator has 8 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHED CAPACITOR CONVERTER ICs, which are the ones used in older voltage regulator 12vs. Space-saving 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packages are available for this harley voltage regulator. DC DC switching regulator is configured with 2 outputs. Adjusting voltage regulator's output pins generate Fixed output. Switching regulators like this one can be mounted on the Surface Mount mounting system. During switching regulator operation, the operating temperature should remain at -40°C~85°C TA. DC-DC switching regulators reach 18kHz~34kHz switching frequencies. This voltage regulator is able to operate with the minimal input voltage of 1.5V. In this adjusting voltage regulator, the output voltage (Min/Fixed) equates to -Vin 2Vin. Featuring a maximum design flexibility of 20mA, dc to dc voltage regulator has a maximum output current of 20mA. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 5V for the purposes of operation. I would like to point out that this voltage regulator belongs to the Other Analog ICs subcategory. DC/DC regulators of this type are part of the MAX865 family of voltage regulator 12vs. At 12V volts, voltage regulator can provide voltage. The switching regulator operation of the system is controlled by 8 pins. The dc to dc voltage regulator's minimum supply voltage of 1.5V volts ensures reliable performance. A maximum supply voltage of 6V is required for adjusting voltage regulator to operate.
MAX865EUA+T Features
2 outputs
Peak reflow temperature (Cel) of 260
8 pins
MAX865EUA+T Applications
There are a lot of Maxim Integrated MAX865EUA+T Voltage Regulators applications.
- Various CNC machine tools
- Die casting equipment
- Lathes
- Smart grid
- Low output voltage switching power supply circuits
- Digital display device
- CMM
- Wind power
- Cutting machine tools
- Serial communication converter
