MAX9039BEBT-T
| Parameters | |
|---|---|
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX9039 |
| Pin Count | 6 |
| JESD-30 Code | R-PBGA-B6 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 2.5/5.5V |
| Response Time | 450 ns |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Average Bias Current-Max (IIB) | 0.025μA |
| Supply Voltage Limit-Max | 6V |
| Current - Quiescent (Max) | 100μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 8mA |
| Propagation Delay (Max) | 450ns |
| Height Seated (Max) | 0.67mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFBGA, CSPBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Terminal Position | BOTTOM |
MAX9039BEBT-T Overview
The product is packaged in 6-WFBGA, CSPBGA for ease of transportation.The comparator has a CMOS, Push-Pull, Rail-to-Rail, TTL output.Electronic comparator is shipped by Tape & Reel (TR) .As you can see, the comparator has6 terminals.Electronic comparator is a component of the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.This is a typical comparator of type with Voltage Reference .Currently, it consists of only 1 elements.The device is equipped with 6 pins.The recommended mounting type is Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.You can find more pin-to-pin solutions for your special requirements by searching MAX9039 .The device can be run with 2.5/5.5V power supplies.
MAX9039BEBT-T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
MAX9039BEBT-T Applications
There are a lot of Maxim Integrated MAX9039BEBT-T linear comparators applications.
- Limit Comparators
- Infotainment and Clusters
- Industrial
- Window Comparators, Multivibrators
- Portable and Battery-Powered Systems
- Battery-Powered Electronics
- RC Timers
- General Purpose Low Voltage Applications
- Motor drives
- Security Detection Systems
