MC100E136FNG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin (Sn) |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 650MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100E136 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Bits | 6 |
| Propagation Delay | 1.45 ns |
| Turn On Delay Time | 1.45 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Max Input Voltage | 4.12V |
| Direction | Up, Down |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Input Lines | 6 |
| fmax-Min | 550 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Timing | Synchronous |
| Height Seated (Max) | 4.57mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100E136FNG Overview
In the 28-LCC (J-Lead)package, it is supplied. Using 28terminations, it can be configured. The supply voltage of 5V permits it to operate with full flexibility. The 1elements are connected by wires. A total of 28pins are available on all components. In this case, it is packaged as Tube. In the circuit, 28pins are used to connect other components. Using [0], it can be mounted. This device is a member of the 100Eseries and is well suited for a wide range of applications. Binary Counteris selected as the logic type. It is recommended to set the operating temperature to 0°C~85°C. A mounting type of Surface Mountis adopted. Providing a voltage of 4.2V~5.7Vensures higher reliability of operation. There are 6bits of information contained in the device. It is possible for the result to be yesin Pbfree code. The base part number of 100E136provides access to more related parts. To operate, it requires a supply voltage of 5V volts. Supply voltages can be as low as 4.2V volts (Vsup). It operates at a frequency of 650MHz Hz. A maximum supply voltage (Vsup) is available up to 5.7V. There are 6 input lines for the input of binary data in the form of on/off signals.
MC100E136FNG Features
Embedded in the 28-LCC (J-Lead) package
Operating supply voltage of 5V
Frequency of 650MHz
MC100E136FNG Applications
There are a lot of ON Semiconductor MC100E136FNG Counters & Dividers applications.
- Binary counter/decoder
- LINEARIZATION
- ALGEBRAIC COMPUTATION
- Programmable decade counters
- Divide-by"N" counters/frequency synthesizers
- counting/frequency sy nthesizers-BCD output
- Control counters
- Signal gating
- TRUE RMS-TO-DC CONVERSION
- Dual Up Counters
