MC100E136FNR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100E136 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Bits | 6 |
| Propagation Delay | 1.45 ns |
| Turn On Delay Time | 1.45 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up, Down |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Input Lines | 6 |
| fmax-Min | 550 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 550000000Hz |
| Count Rate | 650MHz |
| Timing | Synchronous |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100E136FNR2 Overview
This device is supplied in the 28-LCC (J-Lead) package. It is configured with 28terminations. 5Vis fully flexible due to its voltage supply. An interconnection of 1elements is provided by wires. In total, there are 28pins on the component. It is packaged in a manner consistent with Tape & Reel (TR). Circuit components are connected with 28pins. The way of Surface Mount is used to mount it. Due to the fact that it is a member of the 100Eseries, it has a wide range of applications. In this case, the logic type is set to [0]. In this case, the operating temperature should be set to 0°C~85°C. Mounting type Surface Mountis used. In the presence of the supply voltage of [0], it can operate more reliably. As far as the device is concerned, there are 6bits of information. Under its base part number of [0], you will find additional related parts. TAPE AND REEL is employed for its packing. The device requires a supply voltage of [0]. As low as 4.2V Vsup is the minimum supply voltage. There is 5.7V maximum supply voltage (Vsup) allowed. A total of 6input lines are used to input binary data.
MC100E136FNR2 Features
Embedded in the 28-LCC (J-Lead) package
Operating supply voltage of 5V
MC100E136FNR2 Applications
There are a lot of ON Semiconductor MC100E136FNR2 Counters & Dividers applications.
- Divide-by-N counting
- TRUE RMS-TO-DC CONVERSION
- Time-delay circuits
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- POWER COMPUTATION
- Counter control/timers
- Control counters
- Frequency division
- Time Out Timer for Consumer-Application Industrial Controls
- Fixed and programmable counters greater than 10
