MC100E431FNG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100E431 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Clock Frequency | 1.1GHz |
| Propagation Delay | 850 ps |
| Turn On Delay Time | 700 ps |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 132mA |
| Output Characteristics | OPEN-EMITTER |
| Number of Bits per Element | 1 |
| Trigger Type | Positive, Negative |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100E431FNG Overview
It is packaged in the way of 28-LCC (J-Lead). D flip flop is included in the Tubepackage. Currently, the output is configured to use Differential. It is configured with the trigger Positive, Negative. It is mounted in the way of Surface Mount. With a supply voltage of -4.2V~-5.7V volts, it operates. In this case, the operating temperature is 0°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 100Eseries FPGA. This D flip flop should not have a frequency greater than 1.1GHz. T flip flop consumes 132mA quiescent energy. A total of 28 terminations have been made. The object belongs to the 100E431 family. Power is supplied from a voltage of 5V volts. There is an electronic part mounted in the way of Surface Mount. 28pins are included in its design. Its clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. As soon as 5.7Vis reached, Vsup reaches its maximum value. It is imperative that the supply voltage (Vsup) is maintained above 4.2Vin order to ensure normal operation. The system runs on a power supply of -4.5V watts. This input has 3lines in it. Additionally, there are NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V on the electronic flip flop that can be referred to.
MC100E431FNG Features
Tube package
100E series
28 pins
-4.5V power supplies
MC100E431FNG Applications
There are a lot of ON Semiconductor MC100E431FNG Flip Flops applications.
- Matched Rise and Fall
- Latch-up performance
- Latch
- Counters
- Dynamic threshold performance
- Synchronous counter
- Clock pulse
- CMOS Process
- Single Up Count-Control Line
- Power down protection
