MC100EL31DR2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EL31 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 590 ps |
| Turn On Delay Time | 465 ps |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 32mA |
| Trigger Type | Positive Edge |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 37mA |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000000Hz |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100EL31DR2G Overview
In the form of 8-SOIC (0.154, 3.90mm Width), it has been packaged. The Tape & Reel (TR)package contains it. It is configured with Differentialas an output. The trigger it is configured with uses Positive Edge. The electronic part is mounted in the way of Surface Mount. Powered by a -4.2V~-5.7Vvolt supply, it operates as follows. The operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 100EL series. Its output frequency should not exceed 2.8GHz. It consumes 32mA of quiescent The number of terminations is 8. The 100EL31family includes it. A voltage of 5V is used as the power supply for this D latch. This electronic part is mounted in the way of Surface Mount. It is designed with 8 pins. In this device, the clock edge trigger type is Positive Edge. It is included in FF/Latches. It is designed with a number of bits of 1. It reaches 5.7Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be kept above 4.2V. The superior flexibility is achieved through the use of 1 circuits. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. A total of -4.5V power supplies are needed to run it. Additionally, you may refer to the additional NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V of the electronic flip flop. High level output current is set to 50mA. There is no low level output current set at 50mA.
MC100EL31DR2G Features
Tape & Reel (TR) package
100EL series
8 pins
1 Bits
-4.5V power supplies
MC100EL31DR2G Applications
There are a lot of ON Semiconductor MC100EL31DR2G Flip Flops applications.
- Frequency division
- Buffer registers
- Functionally equivalent to the MC10/100EL29
- ESCC
- Registers
- Control circuits
- Modulo – n – counter
- Individual Asynchronous Resets
- Digital electronics systems
- Circuit Design
